Bonsoir, bon j’ai tenté d’appliquer la procédure mais je ne suis pas sûre d’avoir tout bon…
voici ce que ça dit lorsque je tape
nano /etc/init.d/ups-monitor status
#! /bin/sh
### BEGIN INIT INFO
# Provides: nut-client upsmon ups-monitor
# Required-Start: $local_fs $syslog $network $remote_fs
# Required-Stop: $local_fs $syslog $network $remote_fs
# Should-Start: nut-server
# Should-Stop:
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Network UPS Tools monitor initscript
# Description: This script take care of starting and stopping the
# Network UPS Tools monitoring component (upsmon).
### END INIT INFO
# Author: Arnaud Quette <aquette@debian.org>
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/usr/local/sbin:/usr/local/bin
NAME=nut-client
DESC="NUT - power device monitor and shutdown controller"
CONFIG=/etc/nut/nut.conf
pid_dir=/run/nut
upsmon_pid=${pid_dir}/upsmon.pid
upsmon=/sbin/upsmon
log=">/dev/null 2>/dev/null"
# Define LSB log_* functions.
# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
. /lib/lsb/init-functions
# set upsmon specific options. use "man upsmon" for more info
# this parameter is now located in nut.conf, and not in /etc/default/nut anymore
# FIXME: retrieved from 'nut' script during update
UPSMON_OPTIONS=""
# Exit if the package is not installed
[ -x "$upsmon" ] || exit 0
# Include NUT nut.conf
[ -r $CONFIG ] && . $CONFIG
# FIXME: put all common bits, between nut-client and nut-server,
# into a common nut-function
# Explicitly require the configuration to be done in /etc/nut/nut.conf
if [ "x$MODE" = "xnone" -o -z "$MODE" ] ; then
log_action_msg "$NAME disabled, please adjust the configuration to your needs"
log_action_msg "Then set MODE to a suitable value in $CONFIG to enable it"
# exit success to avoid breaking the install process!
exit 0
fi
# Check if /run/nut exists and has the correct perms
check_var_directory() {
[ ! -d ${pid_dir} ] && mkdir -p ${pid_dir} \
&& chown root:nut ${pid_dir} \
&& chmod 770 ${pid_dir} \
&& [ -x /sbin/restorecon ] && /sbin/restorecon ${pid_dir}
}
# check if the right components are running
check_status() {
case "$MODE" in
standalone|netserver|netclient)
status_of_proc -p $upsmon_pid $upsmon upsmon
;;
none|*)
;;
esac
}
start_stop_client () {
case "$MODE" in
standalone|netserver|netclient)
# FIXME: for standalone|netserver, ensure 'nut-server status' returns ?
case "$1" in
start)
start-stop-daemon -S -q -p $upsmon_pid -x $upsmon \
-- $UPSMON_OPTIONS >/dev/null 2>&1 && return 0 || return 1
;;
stop)
start-stop-daemon -K -o -q -p $upsmon_pid -n upsmon >/dev/null 2>&1 \
&& return 0 || return 1
;;
esac
;;
none|*)
return 1
;;
esac
}
case "$1" in
start)
log_daemon_msg "Starting $DESC" "$NAME"
check_var_directory
start_stop_client start
log_end_msg $?
;;
stop)
log_daemon_msg "Stopping $DESC" "$NAME"
start_stop_client stop
log_end_msg $?
;;
reload)
log_daemon_msg "Reloading $DESC" "$NAME"
$upsmon -c reload >/dev/null 2>&1
log_end_msg $?
;;
restart|force-reload)
# FIXME: lack consistency, due to initscript split.
# This only addresses partial reload.
# Full reload requires to:
# - stop nut-client
# - restart (Ie stop+start) nut-server
# - start nut-client
log_daemon_msg "Restarting $DESC" "$NAME"
start_stop_client stop || true
# should then 'start_stop_server stop', Ie /etc/init.d/nut-server stop
#sleep 5
check_var_directory
# should first 'start_stop_server start', Ie /etc/init.d/nut-server start
start_stop_client start
log_end_msg $?
;;
status)
#log_daemon_msg "Checking status of $DESC"
echo "Checking status of $DESC"
check_status
exit $?
;;
poweroff)
case "$MODE" in
standalone|netserver)
# Sanity check
flag=`sed -ne 's#^ *POWERDOWNFLAG *\(.*\)$#\1#p' /etc/nut/upsmon.conf`
if [ -z "$flag" ] ; then
log_action_msg "##########################################################"
log_action_msg "## POWERDOWNFLAG is not defined in /etc/nut/upsmon.conf ##"
log_action_msg "## ##"
log_action_msg "## Please read the Manual page upsmon.conf(5) ##"
log_action_msg "##########################################################"
exit 1
fi
# Defer to nut-server to actually poweroff the UPS, if needed
# (the need is tested here though!)
if $upsmon -K >/dev/null 2>&1 ; then
log_daemon_msg "UPS poweroff required..."
log_end_msg 0
if [ -x /etc/init.d/nut-server ] ; then
exec /etc/init.d/nut-server poweroff
else
log_action_msg "Failure: /etc/init.d/nut-server script missing"
fi
else
log_action_msg "Power down flag is not set (UPS poweroff not needed)"
fi
;;
none|netclient|*)
# nothing to do
log_action_msg "'$MODE' configuration does not require UPS poweroff"
;;
esac
;;
*)
N=/etc/init.d/$NAME
echo "Usage: $N {start|stop|reload|restart|force-reload|status|poweroff}" >&2
exit 1
;;
esac
exit 0