Et le code qui va bien, j’allais oublier :
logger:
ota:
password: "lemotdepassesupersecret"
captive_portal:
substitutions:
friendly_name: ESP32 S3 Korvo1
esphome:
name: esp32-s3-korvo-1
friendly_name: ${friendly_name}
name_add_mac_suffix: true
platformio_options:
board_build.flash_mode: dio
upload_speed: 460800
project:
name: esphome.voice-assistant
version: "1.0"
min_version: 2023.11.1
on_boot:
- priority: 600
then:
- light.turn_on:
id: led_ring
brightness: 70%
effect: connecting
esp32:
board: esp32-s3-devkitc-1
framework:
type: esp-idf
sdkconfig_options:
CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240: "y"
CONFIG_ESP32S3_DATA_CACHE_64KB: "y"
CONFIG_ESP32S3_DATA_CACHE_LINE_64B: "y"
CONFIG_AUDIO_BOARD_CUSTOM: "y"
CONFIG_ESP32_S3_KORVO1_BOARD: "y"
components:
- name: esp32_s3_korvo1_board
source: github://abmantis/esphome_custom_audio_boards@main
refresh: 0s
psram:
mode: octal
speed: 80MHz
external_components:
- source: github://pr#5230
components: esp_adf
refresh: 0s
api:
encryption:
key: "lacleapisupersecrete"
on_client_connected:
then:
- if:
condition:
switch.is_on: use_wake_word
then:
- delay: 1s
- voice_assistant.start_continuous:
- delay: 1s
- voice_assistant.stop:
- delay: 2s
- voice_assistant.start_continuous:
- script.execute: reset_led
on_client_disconnected:
then:
- light.turn_on:
id: led_ring
blue: 0%
red: 100%
green: 100%
brightness: 50%
effect: connecting
dashboard_import:
package_import_url: github://esphome/firmware/voice-assistant/esp32-s3-korvo1.yaml@main
wifi:
ap:
ssid: "Esp32-S3-Korvo-1"
password: "passwordsupersecret"
on_connect:
then:
- delay: 5s # Gives time for improv results to be transmitted
- ble.disable:
on_disconnect:
then:
- ble.enable:
ssid: !secret wifi_ssid
password: !secret wifi_password
improv_serial:
esp32_improv:
authorizer: none
button:
- platform: factory_reset
id: factory_reset_btn
name: Factory reset
esp_adf:
board: esp32s3korvo1
microphone:
- platform: esp_adf
id: korvo_mic
speaker:
- platform: esp_adf
id: korvo_speaker
voice_assistant:
id: voice_asst
microphone: korvo_mic
speaker: korvo_speaker
noise_suppression_level: 4
auto_gain: 10dBFS
volume_multiplier: 1
use_wake_word: false
on_listening:
- light.turn_on:
id: led_ring
blue: 100%
red: 0%
green: 0%
brightness: 100%
effect: wakeword
on_tts_start:
- light.turn_on:
id: led_ring
blue: 0%
red: 0%
green: 100%
brightness: 50%
effect: pulse
on_end:
- delay: 100ms
- wait_until:
not:
speaker.is_playing:
- script.execute: reset_led
on_error:
- light.turn_on:
id: led_ring
blue: 0%
red: 100%
green: 0%
brightness: 100%
effect: none
- delay: 1s
- script.execute: reset_led
- script.wait: reset_led
- lambda: |-
if (code == "wake-provider-missing" || code == "wake-engine-missing") {
id(use_wake_word).turn_off();
}
script:
- id: reset_led
then:
- if:
condition:
switch.is_on: use_wake_word
then:
- light.turn_on:
id: led_ring
blue: 100%
red: 0%
green: 0%
brightness: 30%
effect: none
else:
- light.turn_off: led_ring
switch:
- platform: gpio
id: pa_ctrl
pin: GPIO38
name: "${friendly_name} Speaker Mute"
restore_mode: ALWAYS_ON
- platform: template
name: Use wake word
id: use_wake_word
optimistic: true
restore_mode: RESTORE_DEFAULT_ON
entity_category: config
on_turn_on:
- lambda: id(voice_asst).set_use_wake_word(true);
- if:
condition:
not:
- voice_assistant.is_running
then:
- voice_assistant.start_continuous
- script.execute: reset_led
on_turn_off:
- voice_assistant.stop
- script.execute: reset_led
light:
- platform: esp32_rmt_led_strip
id: led_ring
name: "${friendly_name} Light"
pin: GPIO19
num_leds: 12
rmt_channel: 0
rgb_order: GRB
chipset: ws2812
default_transition_length: 0s
effects:
- pulse:
name: "Pulse"
transition_length: 0.5s
update_interval: 0.5s
- addressable_twinkle:
name: "Working"
twinkle_probability: 5%
progress_interval: 4ms
- addressable_color_wipe:
name: "Wakeword"
colors:
- red: 0%
green: 50%
blue: 0%
num_leds: 12
add_led_interval: 20ms
reverse: false
- addressable_color_wipe:
name: "Connecting"
colors:
- red: 60%
green: 60%
blue: 60%
num_leds: 12
- red: 60%
green: 60%
blue: 0%
num_leds: 12
add_led_interval: 100ms
reverse: true
binary_sensor:
- platform: template
name: "${friendly_name} Volume Up"
id: btn_volume_up
- platform: template
name: "${friendly_name} Volume Down"
id: btn_volume_down
- platform: template
name: "${friendly_name} Set"
id: btn_set
- platform: template
name: "${friendly_name} Play"
id: btn_play
- platform: template
name: "${friendly_name} Mode"
id: btn_mode
on_multi_click:
- timing:
- ON for at least 10s
then:
- button.press: factory_reset_btn
- platform: template
name: "${friendly_name} Record"
id: btn_record
on_press:
- voice_assistant.start:
- light.turn_on:
id: led_ring
brightness: 100%
effect: "Wakeword"
on_release:
- voice_assistant.stop:
- light.turn_off:
id: led_ring
sensor:
- id: button_adc
platform: adc
internal: true
pin: 8
attenuation: 11db
update_interval: 15ms
filters:
- median:
window_size: 5
send_every: 5
send_first_at: 1
- delta: 0.1
on_value_range:
- below: 0.55
then:
- binary_sensor.template.publish:
id: btn_volume_up
state: ON
- above: 0.65
below: 0.92
then:
- binary_sensor.template.publish:
id: btn_volume_down
state: ON
- above: 1.02
below: 1.33
then:
- binary_sensor.template.publish:
id: btn_set
state: ON
- above: 1.43
below: 1.77
then:
- binary_sensor.template.publish:
id: btn_play
state: ON
- above: 1.87
below: 2.15
then:
- binary_sensor.template.publish:
id: btn_mode
state: ON
- above: 2.25
below: 2.56
then:
- binary_sensor.template.publish:
id: btn_record
state: ON
- above: 2.8
then:
- binary_sensor.template.publish:
id: btn_volume_up
state: OFF
- binary_sensor.template.publish:
id: btn_volume_down
state: OFF
- binary_sensor.template.publish:
id: btn_set
state: OFF
- binary_sensor.template.publish:
id: btn_play
state: OFF
- binary_sensor.template.publish:
id: btn_mode
state: OFF
- binary_sensor.template.publish:
id: btn_record
state: OFF